• Voor 23:59 besteld morgen in huis
  • 100 dagen uitproberen, gratis retourneren
  • Het #1 waterontharder alternatief

DELONGHI DESCALING


After the umpteenth cup of coffee, you suddenly see a light on your DeLonghi machine? There is a good chance that it indicates that it would like to be descaled. But how exactly do you do that? You can't just throw every home, garden and kitchen remedy into the device and hope that it will be sufficient. We will explain to you how you can descale your DeLonghi.

DELONGHI ECODECALK

DeLonghi recommends only using their own brand of descaler. This way you can be sure that you do not accidentally damage your machine. The descaling process consists of 12 steps, so take your time.

STEP 1: TURN OFF DEVICE

This seems like a logical step, but people sometimes forget it. So turn off your machine.

STEP 2: EMPTY RESERVOIR

Then empty the water tank and remove the filter, if present.

STEP 3: FILL WATER TANK WITH DESCALING AGENT

Now pour 100 milliliters of descaling agent into the water tank. This is up to level A. Then fill the rest with tap water up to level B. Now place the water tank back in the machine.

STEP 4: INSERT BOX

Place a container with a minimum capacity of 1.5 liters under the steam wand. The water will come out here soon.

STEP 5: DESCALE THE MACHINE

To start the descaling process, press the descaling button for 5 seconds. After 5 seconds the light will stop flashing. This means that the coffee machine is in descaling mode.

STEP 6: TURN STEAM KNOB

Now open the steam knob completely. Move the button towards the 'I' in one smooth movement. Be careful, hot water will now flow from the machine. You can now let the device do its work for about 30 minutes. Then come back for the remaining 6 steps. Are you already tired of all these steps? Read more now about the permanent solution.

STEP 7: TURN STEAM KNOB OFF

Turn the steam knob off again by turning it to the 'O' position.

STEP 8: EMPTY CONTAINER

Empty the container with water and then place it back under the steam wand.

STEP 9:

Are you still reading? Okay okay, let's move on to step 9. Remove the water tank from the machine and rinse it thoroughly.

STEP 10: FILL WATER TANK WITH WATER

Now fill the water reservoir with water up to the 'MAX' line. Place the reservoir back in the machine.

STEP 11: TURN STEAM KNOB

We're almost there. Now turn the steam knob fully open again as you did in step 6.

STEP 12: TURN STEAM KNOB OFF

Now close the steam knob completely again. Kees is ready. Your device has now been descaled.

REMOVE LIMEMEAL DEPOSITS FOREVER

Do you find the above steps as tiring as we do?? Then we have good news. We have launched a professional anti-limescale system that not only prevents limescale, but also removes existing limescale. That's nice, isn't it? The Amfa4000® works with a powerful magnet, which prevents limescale from sticking to your pipes. Installing the Amfa4000® is simple. Place the Amfa4000® on the pipe in your meter cupboard, tie the supplied tie wrap around it, and you're good to go. "And what about maintenance?" we hear you think. Don't worry, the Amfa4000® is maintenance-free. From the moment you install it, you can enjoy clean pipes and appliances for a lifetime? Oh yes, if you do experience any problems with the Amfa4000®, you have a 10-year warranty.

ORDER THE AMFA4000® BEFORE 11:59 PM

Order your own Amfa4000® before 11:59 PM, so you can start descaling your DeLonghi tomorrow.

ORDER NOW

What are you looking for?